PRODUCT FAMILY
Furniture legs and furniture bases
A range of furniture legs, aluminium tube bases and components for cabinetry, tables and shelving.

Support for furniture and interiors
The range includes furniture legs in square and round profiles, aluminium tube systems for furniture bases, and the accessories needed to complete them.
Choose your solution
Explore the range by component type, then review dimensions and drawings in the technical catalogue.
Applications and details
The catalogue describes low furniture bases and light structures such as table bases, partitions and shelving. Select the profiles, connectors and end fittings for the intended construction.

Furniture base
Example from the Zobal catalogue.

Tube connection
Technical drawing of the connector and tube assembly.

Aluminium profiles
Profiles for furniture base constructions.
Compare mounting layouts
The catalogue shows three mounting plate layouts. Drawings below illustrate the N30 × 30 family; check the drawing for your chosen model.

Type A
Square plate with the profile positioned centrally.

Type B
Square plate with the profile offset toward a corner.

Type C
Rectangular plate, 100 × 50 mm, with two mounting holes.
For N30 × 30, NØ 40 and N45 × 45 the catalogue shows A, B and C; for N60 × 60 it shows A and B. Square plates are 80 × 80 mm, or 100 × 100 mm for N60 × 60.
Furniture bases from aluminium tubes
Furniture bases are assembled from 30 × 30 mm and 45 × 45 mm aluminium tubes. Profiles are available pre-cut and drilled or as long profiles for individual processing.
The same system can be used for table bases, partitions and shelving constructions. Tubes can be finished with plugs or height adjusters.

How a base is assembled
01 · Select tubes
Choose 30 × 30 mm or 45 × 45 mm aluminium tubes, supplied long or pre-cut and drilled.
02 · Connect
Join the tubes using the corresponding expansion connectors shown in the technical drawings.
03 · Finish
Complete the tubes with compatible plugs or height adjusters as appropriate for the design.
Standard furniture base frames are supplied without drilling for cabinet assembly. Refer to the catalogue and confirm project-specific details before ordering.
Dimensions and planning
30 × 30 / 45 × 45 mm
Aluminium tube sizes for the furniture base system.
3.5 m / 137.8 in
Standard length of aluminium tubes before cutting.
Up to 250 mm / 9.84 in
Maximum height stated for furniture bases. Confirm dimensions and construction for each project.
For shelving, the catalogue specifies a 50 kg static load when shelf sides are no longer than 1000 mm. Dynamic forces require additional reinforcement. Refer to the technical catalogue for the conditions and drawings.
Full product range
Explore the current legs, tubes, connectors, plugs, adjusters and other components.
N30×30A
N30×30B
N30×30C
NØ 40A
NØ 40B
NØ 40C
N45×45A
N45×45B
N45×45C
N60×60A
N60×60B
ZnAl connector for Leg Ø60
Leg NØ 60
Alu Plug
R 20×20 / R 30×30
R 45×45
RØ 40
R 60×60
ZØ 40
ZØ 60
Roller Ø 40
RØ 60 C-30S
RØ 60
Key for a height adjustement 45×45
Connections
Alu-plug 30×30
Alu-plug 45×45
Tubes A
Tubes B
Z 20×20
Frequently asked questions
What lengths are available?
The catalogue lists standard leg heights of 50, 100, 150, 200 and 250 mm, except for NØ 60, which is listed at 710 or 820 mm. Non-standard legs may be possible after consultation.
Can the tubes be supplied ready for assembly?
The catalogue describes profiles supplied pre-cut and drilled, as well as long profiles for individual processing.
What are the construction limits?
Furniture base height is limited to 250 mm in the catalogue. The 50 kg static-load figure applies to the described shelving construction when shelf sides do not exceed 1000 mm; dynamic forces call for additional reinforcement.
Where can I find the dimensions?
The technical catalogue contains mounting layouts, drawings, sizes and the conditions for base constructions.
Ask about legs and bases
Tell us what you are planning and which components you need. Prepare your enquiry below, then send it from your email application.
Technical catalogue
Review dimensions, components and construction details in the furniture legs and bases catalogue.
