Handles

Handle for lower cupboards
nr 029 003 05

Board thickness 0,70'' / 18 mm.

 Download

Handle for lower cupboards
nr 029 004 05

Board thickness 0,70'' / 18 mm.

 Download

Handle for lower cupboards
nr 029 005 05

Board thickness 0,70'' / 18 mm.

 Download

Handle for lower cupboards
nr 029 006 05

Board thickness 0,70'' / 18 mm.

 Download

Handle for lower cupboards and drawer doors
nr 029 007 05

Board thickness 0,70'' / 18 mm.

 Download

Handle for lower cupboards and drawer doors
nr 029 020 05

Board thickness 0,74'' / 19 mm.

 Download

Handle for lower cupboards and drawer doors
nr 029 008 05

Board thickness 0,62'' / 16 mm.

 Download

Handle for upper cupboards
nr 029 009 05

Board thickness 0,62'' / 16 mm.

 Download

Handle for 0,63" / 16 mm chipboard or 0,12-0,16" / 3-4 mm glass glued to the board.
nr 029 015 05

Board thickness 0,62'' / 16 mm.

 Download

Handle for 0,63" / 16 mm chipboard or 0,12-0,16" / 3-4 mm glass glued to the board
nr 029 016 05

Board thickness 0,62'' / 16 mm

 Download

Handle for lower cupboards and drawer doors
nr 029 017 05

Board thickness 0,70'' / 18 mm.

 Download

Handles for drawers and sliding doors
nr 029 024 05

Board thickness 0,70''÷0,74'' / 18÷19 mm.

 Download

Handles for drawers and sliding doors
nr 029 025 05

Board thickness 0,70''÷0,74'' / 18÷19 mm.

 Download

Handle for lower cupboards and drawer doors
nr 029 105 05

Board thickness 0,70" / 18 mm

 Download

Handle is fixed using two-sided adhesive tape 0,2 mm / 0,01" or screws.

nr 011 055 05

 Download

When ordering, one should specify the type of milling. Otherwise, the handles will be made without milling the gripping part (only cut straight).

The suggested thickness of the front board for U-9 handle in the milling types: D, E and M is 19 mm / 0,75".

nr 011 054 05

 Download

Handle is fixed using two-sided adhesive tape 0,2 mm / 0,01" or screws.

nr 011 055 05

 Download

When ordering, one should specify the type of milling. Otherwise, the handles will be made without milling the gripping part (only cut straight).

The suggested thickness of the front board for U-9 handle in the milling types: D, E and M is 19 mm / 0,75".

nr 011 054 05

 Download